High Profile Split Trumpet Aluminum Flash Collar
With .060" Wall Thickness
Description
Trumpet collars are generally used with flagpoles where a shoe base is welded to the bottom; however, these collars can be used on standard in-ground mounted flagpoles if a higher profile is desired. A split collar can be useful when replacing or adding a collar to an installed flagpole without removing the pole from the foundation sleeve. The collar is split in half and mounting tabs with screws are installed on the under side of the collar. The quantity and size of the mounting tabs may vary depending on the size of the flash collar ordered. Supplied in a standard wall thickness of .060".
High Profile Split Trumpet Aluminum Flash Collar
| Model | Pole Diameter | Outside Diameter | Height | Price | View |
|---|---|---|---|---|---|
| CHPSPLT-23810 | 2-3/8" | 10" | 3-1/2" | $238 | View |
| CHPSPLT-310 | 3" | 10" | 2-3/4" | $238 | View |
| CHPSPLT-316 | 3" | 16" | 5-3/4" | $290 | View |
| CHPSPLT-416 | 4" | 16" | 5-3/4" | $290 | View |
| CHPSPLT-516 | 5" | 16" | 6-1/4" | $290 | View |
| CHPSPLT-616 | 6" | 16" | 7-7/8" | $290 | View |
| CHPSPLT-716 | 7" | 16" | 7-7/8" | $290 | View |
| CHPSPLT-816 | 8" | 16" | 7-7/8" | $290 | View |
| CHPSPLT-1022 | 10" | 22" | 8-1/4" | $421 | View |
| CHPSPLT-1226 | 12" | 26" | 11" | View |
