TRK-9709 4" Double Revolving Truck
Description
- Cast Aluminum Body.
- Double Aluminum Pulleys on Stainless Steel Axles.
- Upper and Lower Stainless Steel Ball Bearing Assemblies.
- Non-Fouling Design.
- 1-1/4" NPT Spindle.
- 1/2"-13NC Top Drilling (5/8"-11NC Available).
- Recommended Halyard Diameter – 5/16"
Technical Specifications
- Brand
- Concord American
- Model
- TRK-9709
- Shaft Top Diameter
- 4"
External Flagpole Trucks
External Flagpole Trucks sit at the top of the flagpole, providing an exposed pulley and rope system for raising and lowering the flag.
All Trucks are designed to accept Balls, Eagles and Finials. Standard Spindle Threading is 1-1/4" NPT (1" NPT and 1-1/2" NPT Spindles available upon request).
Powder Coat Finish Options
BZT = Powder Coat – BronzeTone
BLK = Powder Coat – Black
WHT = Powder Coat – White
CLR = Powder Coat – Clear
External Stationary
Cap Design
Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts.
Stationary Trucks are fixed and will not rotate.
External Single Revolving
Spindle Design
Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole.
Revolving Trucks rotate the flag with the wind.
