The Titan Series from Concord American Flagpole offers commercial grade flagpoles with the security of an Internal Halyard Winch and Wire Cable system. Ranging in heights from 20' to 80', the concealed halyard and lockable flush mount hinged door delivers project owners the peace of mind provided with 24-7 security.
Titan Flagpoles unite the simplicity of efficient engineering with the aesthetics of a precision cut, rectangular flush mount door design, providing an internal halyard Winch system that is ideal for low to moderate wind speed areas.
For additional Winch option flagpoles, see Sovereignty ISW Raised Reinforced Door Frame and Independence IRW Reinforced Welded Door Frame.
The exposed height in feet above grade and is measured to the top of the of the flagpole shaft. *When truck and ornaments are added, overall height can be greater by 1'-2', which can be relevant in areas with height ordinances. Upon request and at no additional charge, Mounting Heights can be shortened to achieve the desired overall height.
Standard Ground Set Flagpoles offered in 25' Mounting Heights are manufactured in a single piece with an overall length of 26'-6". Below grade, 2'-6" will be inserted into the Ground Sleeve. When the truck and finial are attached, the nominal height of the completed flagpole will be 25'. This industry accepted standard allows shipping in a pup trailer at a significant freight savings. Full 27'-6" shafts are available upon request.
The diameter in inches at the base of the shaft.
The diameter in inches at the very top of the shaft.
The thickness of the shaft in inches, varying from .125" to .500".
Flagpoles are available in both single and multi-piece designs. Flagpoles 45' and larger will contain multiple piece shafts based on Mounting Height. Sections can be easily field assembled without any loss of structural integrity, leaving only a hairline joint to indicate that the shaft is not a single piece flagpole.