For Wire Cable Based Internal Halyard Winch System Flagpoles
Durable stainless steel wire cable for use in internal halyard winch flagpole systems. Sold by the foot.
Price per foot
Choose your Design Wind Speed. Any flagged flagpole that does not meet your Design Wind Speed will be removed from the results.
Design Wind Speed is the 3-Second Gust Wind Speed in miles per hour at 33 ft above ground level. Wind speeds correspond to approximately a 7% probability of exceedance in 50 years (annual exceedance probability = 0.00143, MRI = 700 years). This is also known as the Allowable Stress Design Wind Speed (VASD).
Choose the flag(s) for your flagpole.
Next, choose the type of flagpole you need.
Choose the mounting height for your flagpole. This is the height of the flagpole from the ground to the top of the flagpole.
Choose the butt diameter for your flagpole. This is the diameter of the bottom of the flagpole.
Tip: Larger butt diameters carry higher wind ratings.
Finally, choose the wall thickness for your flagpole. This is the thickness of the wall of the flagpole.
Tip: Choose the thinnest wall available (e.g. 0.125 inch) for the most economical option.
Are you sure you want to proceed?
