Free shipping on orders over $100

TRK-9610 In-Line Single Revolving Truck

Orders for Flags: FlagDesk strives to keep U.S. flags in stock in most sizes. If not in stock, you will be notified within 24 hours of lead time. Flag production is currently experiencing longer lead times.

Orders for Flagpoles: If not in stock, may require a lead time of 4 to 6 weeks for fabrication. You will be notified of the estimated ship date.

In-Line Single Revolving Truck
  • In-Line Cast Aluminum Body.
  • Single Aluminum Pulley on Stainless Steel Axle.
  • Upper and Lower Stainless Steel Ball Bearing Assemblies.
  • 1-1/4" NPT Spindle.
  • 1/2"-13NC Top Drilling (5/8"-11NC Available).
  • Recommended Halyard Diameter – 5/16".
Technical Details
  • Brand - Concord American
  • Model - TRK-9610
  • Shaft Top Diameter - 4"

External Flagpole Trucks

External Flagpole Trucks sit at the top of the flagpole, providing an exposed pulley and rope system for raising and lowering the flag.

All Trucks are designed to accept Balls, Eagles and Finials. Standard Spindle Threading is 1-1/4" NPT (1" NPT and 1-1/2" NPT Spindles available upon request).

Powder Coat Finish Options

BZT = Powder Coat – BronzeTone
BLK = Powder Coat – Black
WHT = Powder Coat – White
CLR = Powder Coat – Clear

External Halyard Flagpole Truck Example
External Stationary Truck - Cap Design Example
External Stationary
Cap Design

Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts.

Stationary Trucks are fixed and will not rotate.

External Single Revolving Truck - Spindle Design Example
External Single Revolving
Spindle Design

Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole.

Revolving Trucks rotate the flag with the wind.

External Double Revolving Truck - Spindle Design Example
External Double Revolving
Spindle Design
${alert.message}