Free shipping on orders over $100

Flagpole Finder

External Flagpoles

External Halyard Flagpole Diagram

External Halyard Flagpole Systems place the rope halyard on the outside of the flagpole.

These systems utilize flagpole trucks with an exposed pulley, rope halyard and flagpole cleat.

Choose Height

External Flagpoles
Rope Halyard


External Revolving Trucks vs. External Stationary Trucks

Options include include Stationary Trucks, which are fixed and will not rotate, and Revolving Trucks, which rotate the flag with the wind. A Double Revolving Truck is also available and includes an extra cleat and complete double halyard assembly.

External Single Revolving Truck - Spindle Design Example
External Single Revolving
Spindle Design

Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole.

Revolving Trucks rotate the flag with the wind.

External Double Revolving Truck - Spindle Design Example
External Double Revolving
Spindle Design
External Stationary Truck - Cap Design Example
External Stationary
Cap Design

Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts.

Stationary Trucks are fixed and will not rotate.


Internal Flagpoles

Internal Halyard Flagpole Diagram

Internal Halyard Flagpole Systems enclose the halyard behind the security of a lockable access door.

Cam Cleat vs. Winch

Cam Cleat Systems incorporate rope halyard in a heavy-duty cam action cleat. Winch Systems incorporate wire halyard with a gearless Winch and Winch Handle.

Cam Cleat Internal System

Choose Height

Internal Flagpoles
Rope Halyard
(Cam Cleat Systems)

Winch Internal System

Choose Height

Internal Flagpoles
Wire Halyard
(Winch Systems)


Internal Revolving Trucks vs. Internal Stationary Trucks

Internal Trucks sit at the top of the flagpole, providing an enclosed pulley system for the Wire or Rope Halyard.

Options include Stationary Trucks, which are fixed and will not rotate, and Revolving Trucks, which rotate the flag with the wind.

Internal Revolving Truck - Spindle Design Example
Internal Revolving
Spindle Design

Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole.

Revolving Trucks rotate the flag with the wind.

Internal Stationary Truck - Cap Design Example
Internal Single Stationary
Cap Design

Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts.

Stationary Trucks are fixed and will not rotate.


Shaft Descriptions and Options

Mounting Height
Mounting Height

The exposed height in feet above grade and is measured to the top of the of the flagpole shaft. *When truck and ornaments are added, overall height can be greater by 1'-2', which can be relevant in areas with height ordinances. Upon request and at no additional charge, Mounting Heights can be shortened to achieve the desired overall height.

25' Mounting Height Exception
25' Mounting Height Exception

Standard Ground Set Flagpoles offered in 25' Mounting Heights are manufactured in a single piece with an overall length of 26'-6". Below grade, 2'-6" will be inserted into the Ground Sleeve. When the truck and finial are attached, the nominal height of the completed flagpole will be 25'. This industry accepted standard allows shipping in a pup trailer at a significant freight savings. Full 27'-6" shafts are available upon request.

Butt Diameter
Butt Diameter

The diameter in inches at the base of the shaft.

Top Diameter
Top Diameter

The diameter in inches at the very top of the shaft.

Wall Thickness
Wall Thickness

The thickness of the shaft in inches, varying from .125" to .500".

Single and Multi-Piece Shafts
Single & Multi-Piece Shafts

Flagpoles are available in both single and multi-piece designs. Flagpoles 45' and larger will contain multiple piece shafts based on Mounting Height. Sections can be easily field assembled without any loss of structural integrity, leaving only a hairline joint to indicate that the shaft is not a single piece flagpole.


${alert.message}