Home Page » Outdoor Flagpoles » Hurricane IH Flagpoles

Hurricane IH Flagpoles

The price (qty 1) is shown below. Additional price breaks are available on larger quantities. Select flagpole color (finish) using the tabs above.

SPECIFICATIONS
MODEL HEIGHT BUTT
DIAMETER
WALL
THICK.
NUM. OF
SECTIONS
MAX WIND
NO FLAG
MAX WIND
w/ FLAG
MAXIMUM
FLAG SIZE
WT. PRICE
View ECH25IH 25 ft. 6" 0.25" 1 255 Mph 150 Mph 4 x 6 ft. 239 lbs. $2,415.00
View ECH30IH 30 ft. 6" 0.25" 2 241 Mph 150 Mph 5 x 8 ft. 283 lbs. $2,968.00
View ECH35IH 35 ft. 8" 0.25" 2 255 Mph 150 Mph 6 x 10 ft. 382 lbs. $3,262.00
View ECH40IH 40 ft. 8" 0.25" 2 231 Mph 150 Mph 8 x 12 ft. 421 lbs. $3,696.00
View ECH50IH 50 ft. 10" 0.312" 3 230 Mph 150 Mph 10 x 15 ft. 799 lbs. $6,020.00

The price (qty 1) is shown below. Additional price breaks are available on larger quantities. Select flagpole color (finish) using the tabs above.

SPECIFICATIONS
MODEL HEIGHT BUTT
DIAMETER
WALL
THICK.
NUM. OF
SECTIONS
MAX WIND
NO FLAG
MAX WIND
w/ FLAG
MAXIMUM
FLAG SIZE
WT. PRICE
View ECH25IH 25 ft. 6" 0.25" 1 255 Mph 150 Mph 4 x 6 ft. 239 lbs. $2,597.00
View ECH30IH 30 ft. 6" 0.25" 2 241 Mph 150 Mph 5 x 8 ft. 283 lbs. $3,220.00
View ECH35IH 35 ft. 8" 0.25" 2 255 Mph 150 Mph 6 x 10 ft. 382 lbs. $3,612.00
View ECH40IH 40 ft. 8" 0.25" 2 231 Mph 150 Mph 8 x 12 ft. 421 lbs. $4,102.00
View ECH50IH 50 ft. 10" 0.312" 3 230 Mph 150 Mph 10 x 15 ft. 799 lbs. $6,629.00

The price (qty 1) is shown below. Additional price breaks are available on larger quantities. Select flagpole color (finish) using the tabs above.

SPECIFICATIONS
MODEL HEIGHT BUTT
DIAMETER
WALL
THICK.
NUM. OF
SECTIONS
MAX WIND
NO FLAG
MAX WIND
w/ FLAG
MAXIMUM
FLAG SIZE
WT. PRICE
View ECH25IH 25 ft. 6" 0.25" 1 255 Mph 150 Mph 4 x 6 ft. 239 lbs. $2,674.00
View ECH30IH 30 ft. 6" 0.25" 2 241 Mph 150 Mph 5 x 8 ft. 283 lbs. $3,262.00
View ECH35IH 35 ft. 8" 0.25" 2 255 Mph 150 Mph 6 x 10 ft. 382 lbs. $3,717.00
View ECH40IH 40 ft. 8" 0.25" 2 231 Mph 150 Mph 8 x 12 ft. 421 lbs. $4,214.00
View ECH50IH 50 ft. 10" 0.312" 3 230 Mph 150 Mph 10 x 15 ft. 799 lbs. $6,797.00

The price (qty 1) is shown below. Additional price breaks are available on larger quantities. Select flagpole color (finish) using the tabs above.

SPECIFICATIONS
MODEL HEIGHT BUTT
DIAMETER
WALL
THICK.
NUM. OF
SECTIONS
MAX WIND
NO FLAG
MAX WIND
w/ FLAG
MAXIMUM
FLAG SIZE
WT. PRICE
View ECH25IH 25 ft. 6" 0.25" 1 255 Mph 150 Mph 4 x 6 ft. 239 lbs. $2,751.00
View ECH30IH 30 ft. 6" 0.25" 2 241 Mph 150 Mph 5 x 8 ft. 283 lbs. $3,374.00
View ECH35IH 35 ft. 8" 0.25" 2 255 Mph 150 Mph 6 x 10 ft. 382 lbs. $3,871.00
View ECH40IH 40 ft. 8" 0.25" 2 231 Mph 150 Mph 8 x 12 ft. 421 lbs. $4,396.00
View ECH50IH 50 ft. 10" 0.312" 3 230 Mph 150 Mph 10 x 15 ft. 799 lbs. $7,049.00

Hurricane IH Flagpoles Information

Increased wall thickness and/or butt diameter make these flagpoles ideal for very windy locations.

Ground Set Cone Tapered Aluminum Flagpoles
General Information | Standard Finishes | Wind Chart | Special Budget Series Technical Drawings

These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self-locking at any point, eliminating the need for a separate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles.

Standard Finishes

Satin Aluminum Silver Flagpole Finish
Satin Aluminum (Standard)
Clear Flagpole Finish
Clear Anodized
Bronze 311 Flagpole Finish
Bronze #311 Anodized
Bronze 312 Flagpole Finish
Bronze #312 Anodized
Bronze 313 Flagpole Finish
Bronze #313 Anodized
Black Flagpole Finish
Black Anodized

All flagpole shafts are highly polished with fine grain aluminum oxide cloth resulting in a high quality, deep satin lustre finish. This finish represents the ultimate in architectural finishes for aluminum flagpoles. The elegant, soft sheen remains maintenance free. In addition to satin, the following anodized finishes are available as standard colors: clear, light bronze #311, medium bronze #312, dark bronze #313 & black #335. Note: Of the three bronze finishes, dark bronze #313 is supplied unless otherwise specified.

Link to this page:

Send this link via E-Mail

ECH25IH 25 FT SATIN ALUMINUM FLAGPOLE w/STD ACCESS