Galvanized Steel Foundation Sleeves
OFF
Description
The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1' of the flagpole to be encased in the ground sleeve for each 10' of exposed flagpole height. The diameter of the sleeve should be at least 2" greater than the outside diameter of the flagpole with the area between the flagpole and the sleeve filled with dry sand. Sleeves with a 6" diameter are supplied with a base plate and grounding spike. Sleeves with a diameter of greater than 6" are supplied with a base plate, support plate, grounding spike and, for ease of vertical alignment, steel centering wedges welded to the inside of the base plate.
*Note: 380000 and 380002 are supplied with Base Plate & Ground Spike
*Note: 380003 to 380014 are supplied with Base Plate, Support Plate, Grounding Spike & Steel Centering Wedges
Related Videos
Flag Runners: Chicago Steel tilt Down0:48 - Views: 666
Flag Runners: Wilmette Resident Tangled Flag0:36 - Views: 914
Flag Runners: How to install a flagpole: placement makes a difference0:42 - Views: 722
Related Articles
Related FlagRunners
Related Categories
Link to this page:
Galvanized Steel Foundation Sleeves