(324138) ECH30IH Hurricane IH 30' x 6" x 0.25" Satin Aluminum Flagpole
Description
Note:Increased wall thickness and/or butt diameter make these flagpoles ideal for very windy locations!
Standard Accessories:- Cast aluminum revolving truck w/stainless steel bearings
- M Winch assembly with lock and keys (*Note: No monthly lubrication required)
- Removable hand crank to raise and lower the flag
- Stainless steel aircraft cable
- Stainless steel swivel flag snaps
- Beaded retainer ring assembly
- Counterweight
- Spun aluminum flash collar
- Galvanized steel foundation sleeve
Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry's most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1" in every 5-1/2 feet. Poles with overall lengths of less than 38' 6" are shipped in one piece. Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hair-line joint will occur.
All poles are double spiral wrapped with protective paper and shipped in a hard fiber tube. Note: The flagpole shaft will stain if allowed to remain in contact with wet or damp wrappings. If there is any sign that the shaft or its shipping tube has come in contact with water during shipment, remove it from the tube and unwrap immediately. If the shaft is to be stored outdoors, it must be stored unwrapped, and off the ground. If the shaft is to be stored indoors, it may be left in the wrappings and the tube, provided that it shows no sign of having been exposed to moisture, and that it will not be exposed to moisture during storage.
Related Videos
Deluxe Internal Flag Display @NestleUSA1:38 - Views: 22
The Dangers of Fertilizer to Flagpoles! - Gerber Collision & Glass1:11 - Views: 32
Security at the Chicago Belmont Harbor Flagpoles2:08 - Views: 69
Related Categories
Link to this page:
(324138) ECH30IH Hurricane IH 30' x 6" x 0.25" Satin Aluminum Flagpole