(320481) EC30IH Deluxe IH 30' x 6" x 0.188" Satin Aluminum Flagpole
Description
Standard Accessories:- Cast aluminum revolving truck w/stainless steel bearings
- M Winch assembly with lock and keys (*Note: No monthly lubrication required)
- Removable hand crank to raise and lower the flag
- Stainless steel aircraft cable
- Stainless steel swivel flag snaps
- Beaded retainer ring assembly
- Counterweight
- Spun aluminum flash collar
- Galvanized steel foundation sleeve
These deluxe internal halyard commercial flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self-locking at any point, eliminating the need for a separate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles.
Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry's most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1" in every 5-1/2 feet. Poles with overall lengths of less than 38' 6" are shipped in one piece. Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hair-line joint will occur.
All poles are double spiral wrapped with protective paper and shipped in a hard fiber tube. Note: The flagpole shaft will stain if allowed to remain in contact with wet or damp wrappings. If there is any sign that the shaft or its shipping tube has come in contact with water during shipment, remove it from the tube and unwrap immediately. If the shaft is to be stored outdoors, it must be stored unwrapped, and off the ground. If the shaft is to be stored indoors, it may be left in the wrappings and the tube, provided that it shows no sign of having been exposed to moisture, and that it will not be exposed to moisture during storage.
Included Pole Accessories
Each of these pole accessories are included with this flagpole. *Note: These parts may be purchased separately if you're looking for replacement flagpole parts or accessories.
Related Videos
Internal Halyard Cam Cleat Flagpole, James St. Syracuse, NY1:42 - Views: 45
Flagpole M-Winch Replacement | Arlington Heights, IL2:53 - Views: 463
Flags of the Day: Joseph Hospital, Syracuse, NY @StJosephsHealth1:16 - Views: 21
Related Articles
Related Pictures
Related FlagRunners
- Internal Cam Cleat Flagpole - Signs and Symptoms of Hardware Failure, Syracuse NY
- Dark Bronze 35 ft. Flagpoles at ThermoFisher Scientific
- Access Doors for Cam Cleat Flagpoles: Westin Hotel, Wheeling IL
- Abbott: How a 125 Year Company Welcomes with Flags
- Commercial Aluminum Flag & Pole Maintenance | Rotating & Stationary Internal Halyard Truck Top Systems
Related Products
010007
NF8 5 x 8 Eagle Nylon American Flag
$71.10 $49.77
323878
6" Counter-Balanced Tilting System
$2,720.00 $2,040.00
323885
6" Tilting Shoe Base With Anchor Bolts
$500.00 $375.00
323891
6" Shoe Base With Anchor Bolts
$300.00 $225.00
330056
E-16 15" Aluminum Flying Eagle Gold
$119.00 $95.20
Link to this page:
(320481) EC30IH Deluxe IH 30' x 6" x 0.188" Satin Aluminum Flagpole